Products for Enthusiasts and Professionals
Product
Fitted
Fitting Vehicle model
FIAT 500 & 500C (2007-)
Installation Procedure
Note: Make sure that the top of the black sheet is aligned with the top of the top hole (to ensure that the body is securely bonded to the body, the top of the black sheet should not be uneven with the body). (Make sure that the top edge of the black sheet is not uneven with the body to ensure a secure bond between the body and the body.
- The red line in the above image is a reference point for tape application.
- In order to drain the bottom end of the body, please apply double-sided tape to the side with a gap.
- Please decide the place to apply the tape on the back side of the product in advance, and paint, polish, or apply primer.
- Please apply the tape in such a way that it is difficult for rainwater to enter from the top to the inside.
- Please apply the tape in such a way that the black sheet will not come off (co-attach)
- Wash and degrease the body mounting surface before applying.
Prepare a 15 mm wide piece of masking tape.
Apply the masking tape and trace the press lines with a pencil.
Make sure it is parallel to the body line.
- Please check in advance that it can be applied perfectly and without gaps.
- Please be careful not to change the position of the adhesive on both sides.
- Look around the gluing surface and confirm that there are no peeling or lifting, and then leave it for at least 24 hours. Check for any looseness after each operation.
Tools to use
- Marking pencils
- Masking tape (15mm wide)
- Double-coated adhesive tape (3M Hi-Tack double-coated adhesive tape, 1.2mm thickness recommended)
- Primer (3M PAC Primer N-200 is recommended)
- Car wash tools
- Isopropyl alcohol
CAUTION
- This product is a left and right hand set
- This product has a few pinholes. Please fill in the holes before painting.
- This product has not been painted, so please paint it before use.
- Painting the localized areas (especially around the eaveses) requires skill and equipment. Please consult with your local factory or other specialists beforehand. (we have not tested this product with can sprayers or simple equipment.
- This product is designed for exclusive use by the car model, so please do not install it in other models. Please follow the installation method specified by us.
- Please purchase this product only if you agree to the above terms and conditions.